Máy đo bề dày lớp phủ KERN TG 1250-0.1FN

MODEL: TG 1250-0.1FN 0942.931.419 Mr.Hùng

- Thiết bị đo chiều dày lớp phủ kỹ thuật số - Model: TG 1250 0.1FN - Hãng sản xuất: Kern - Germany

14,000,000 đ

14000000VNDCó hàng

MUA
Chi tiết sản phẩm

 

 

Thiết bị đo chiều dày lớp phủ kỹ thuật số

 

Model: TG 1250-0.1FN; Kern - Germany

 

Features

 

* This instrument meets the standards of both, ISO 2178 and ISO 2361, and DIN as well as ASTM und BS.

It is suitable for the laboratory and for use in`harsh field conditions.`

* The F mode measures the thickness of nonmagnetic materials, e.g. paint, plastic, porcelain enamel, copper, zinc, aluminium, chrome, laquer layers etc. These layers are located on magnetic materials e.g. steel, iron, nickle etc. It is often used to measure the thickness of galvanizing layer, laquer layer, porcelain enamel layer, phosphide layer, copper tile, aluminium tile, some alloy tile, paper etc. Those layers are to be found on magnetic base materials like iron, steel, nickel etc.

* The N mode measures the thickness of nonmagnetic coatings, e.g. anodizing, varnish, paint, enamel, plastic coatings, powder etc. These layers are located on non-magnetic metals e.g. aluminium, brass, non magnetic stainless steel etc.

* Automatically substrate recognition

* Manually or automatically “auto power off” to conserve batteries.

* Two measurement modes: - single and continuous

* Wide measuring range and high resolution

* Metric/ imperial conversion

* Digital backlight display enables exact reading with no guessing or errors

* Can communicate with PC for statistics and printing by  the optional cable.

* Can store up to 99 measurements

* Statistics available

Specifications

Display: 4 digits LCD, with backlight

Range: 0 up to 1250 µm/ 0 up to 50 mil

 (another range may be specified)

Resolution:

0.1µm (0 up to 99.9µm)

1µm (over 100µm)

Accuracy:

- Standard: 3% of the measured value or min. ± 2.5 µm

Is valid within a tolerance range of ± 100 μm around the individually measured range, if a two-point calibration was performed within this tolerance range.

- Off-Set Accur Mode: 1% of the measured value or min. ± 1.0 µm

 Is valid within ± 50 μm around the Off-Set Accur point.

PC interface: mit RS-232C interface

Power supply: 2 x 1.5V AAA(UM-4) batteries

Operating conditions

Temperatures 0 up to 50°C

Humidity < 95 %

Dimensions: 126 x 65 x 35 mm (5.0 x 2.6 x 1.6 inch)

Weight: ca.81g (without batteries)

Accessories:

- Carrying case

- Operation manual

- F-sensor, (inbuilt at TF, at TG one sensor  for F and FN is extern, it has to be plugged in)

- NF-sensor, (inbuilt at TF)

- Calibration foils

- Base plate (iron)

- Base plate (aluminium)

Optional accessories:

Cable & software for RS-232C

USB adapter for RS-232C Software

Danh mục sản phẩm

Hổ trợ trực tuyến

Tư vấn trực tuyến

Tư vấn trực tuyến - 0988.685.856

Mr. Hùng

Mr. Hùng - 0942.931.419

Mr.Hùng

Mr.Hùng - 0988.685.856

Máy đo độ pH (15)

Hãng

Cân điện tử (136)

Tủ an toàn sinh học (155)

Thống kê truy cập

  • Đang online 733
  • Hôm nay 4241
  • Hôm qua 5771
  • Trong tuần 345599
  • Trong tháng 1430111
  • Tổng cộng 15480664

STECH INTERNATIONAL ., LTD

Địa chỉ: BT1B-A312, KĐT Mễ Trì Thượng, Phường Mễ Trì, Quận Nam Từ Liêm - Hà Nội

Điện thoại: 0988.685.856 | 0942.931.419

Email: vattukhoahocquocte@gmail.com

 

Top

  0988.685.856